Capresso E Series Instruções de Operação

Operating Instructionsand WarrantyCustomer Service 1-800-220-5701Impressa F9 Fully AutomaticCoffee & Espresso Centerwith Claris Water Care System

4. PLEASE, DON’T... (or you void your warranty protection):• Never fill instant coffee into the grinder or ground coffee funnel;it can damage the func

The following procedure is only necessary when setting up themachine for the first time and after the procedure "EmptyingSystem Before Transport&

• Open the lid of the bean container (Fig. 1.9).• To adjust grinding turn the selector switch to the desired position (Fig. 7).The smaller the dots, t

11. USING PRE-GROUND COFFEEYou can also use pre-ground coffee, bypassing the grinder. Thiscomes in handy if someone requests decaf, sugar coated or fl

again and you will have another 60 seconds of steam. You canalso change the steam output to a shorter interval (chapter 18e).Tips for frothing (Cappuc

machines. The Claris cartridge:• Reduces the water hardness up to 75%.• Removes (if present) up to 85% chlorine, up to 90% lead, up to 95% copper and

Dispose it with your regular household trash.• Make sure the water tank is empty.• Remove cartridge from its bag.• Open water container lid and pull

Important: If you choose the selection "–" the water hardnessmonitor is turned off. In this case the machine will NOT remindyou when it is t

18b. PROGRAMMING TEMPERATUREThe factory setting is HIGH. You can change to NORMAL. InNORMAL the temperature is approx. 7º F lower than in high.• Press

• Touch the arrow until the display shows STEAM 60 SEC.• Touch ST@RT. The number 60 starts blinking.• Touch either arrow repeatedly until the desired

NOTICE: Your Impressa F9 has a 3-prong grounded plug. Toreduce the risk of electrical shock this plug will fit in an outletonly one way. If the plug d

• Touch ST@RT. The hour segment starts blinking.• Touch either arrow repeatedly to set the hours. • Touch ST@RT to confirm. The minute segment starts

into the machine (Fig. 23). The display shows SELECTPRODUCT and you may now continue brewing coffee.19c. FILL BEANSWhen the display shows FILL BEANS,

This cleaning program takes about 15 minutes. Please use onewhite cleaning tablet (enclosed). The machine comes with apack of 2 tablets. To re-order c

7. Push the Rinse Button. The machine will pump the mixture through the frother in intervals. Then it pumps the mixture (internally) into the drawer.

All supplies are available through:- the enclosed mail order form that came with your machine- our toll free line at 1-800-220-5701 or- the Internet a

When using very oily beans pour the beans onto a plate and letsome of the sticky oils evaporate (this will not harm the aroma ofthe coffee).Reason: Yo

Jura-Capresso LLC.81 Ruckman RoadCloster, NJ 076241-800-220-5701 • 201-767-3999Fax: 201-767-9684email: [email protected]: www.capresso.com

1. Height-Adjustable Coffee Spout2. Operating Buttons (See Fig. 3)3. Removable Water Tank4. Low Water Flotation Device (See Fig. 8.4)5. Claris Water C

Fig. 6Fig. 7Fig. 8Fig. 3Fig. 4Fig. 5Fig. 9Fig. 10 Fig. 114a. On/Off b. Rinse(PRESS MAINT.)c. 1-Cupd. 2-Cupe. Programmingf. Pre-Ground Coffeea bc

Fig. 13 Fig. 14Fig. 15Fig. 16Fig. 12a b c Tip Metal Cylinder

Fig. 19 Fig. 20IMPRESIA F9Fig. 21Fig. 22 Fig. 23Fig. 17Fig. 18Steaming:upFrothing:downFig. 24a. Metal Tube b. Chrome Sleevec. Steam Nozzleabc7.

Table of Contents8.Important Safeguards / Jura-Capresso...2Illustrations...

1. PRODUCT REGISTRATION Please read the enclosed product registration form now. Fill itout and mail or fax it to us within two weeks after purchasingy

This system replaces the Dual Frother Plus and lets you fill cup after cup with the desired amount of hot milk and milk froth automatically. For detai